A pallet label is not a big case label. It is a different machine problem.
The label is large, it goes onto a stack rather than a box, the stack is not always square, more than one face may need a label, and the barcode on it is unique to that pallet by definition. The Altech ALcode P pallet labeling system is Altech's dedicated print and apply system for that job.
Marapack Services is the Pacific Northwest distributor for Altech labeling systems, importing direct from the factory in Bareggio, Italy. Pallet labeling is one of the two ends of a PTI implementation, and it is an easy end to leave until last. Marapack Services is an independent company, not Altech S.r.l. and not ALTech US.
Planning the pallet end of your line? Book an equipment audit and we look at the pallet build area and the packing line together.
What is the Altech ALcode P pallet labeling system?
The ALcode P is Altech's dedicated pallet labeling system, built to apply A5 GS1-128 SSCC labels to two adjacent faces of a pallet in a single stop, at up to 180 pallets an hour on one face and 120 on two faces. It is a print and apply pallet labeler: it prints the pallet label, with its serial shipping container code, at the moment the pallet is finished, and applies it to the load.
It belongs to the same ALcode family as the industrial CD20 print and apply head, built for a pallet rather than a case. Where pallets arrive at a labeling station in a predictable position on a fixed line, a dedicated system like this is the first configuration to look at.
What is the ALcode P specification?
The ALcode P labels up to 180 pallets an hour on one face, or 120 an hour on two faces, with A5 labels (148 x 210 mm, about 5.8 x 8.3 in) as standard. It prints up to 167.5 mm wide at 203 or 305 dpi and applies by contact from a flexible tamp head with pressure sensing, which Altech says can be built with axis strokes for non-standard pallets.
| ALcode P, as Altech publishes it | |
|---|---|
| Production speed | Up to 180 pallets/h on one face, 120 pallets/h on two faces, depending on label size and applicator configuration |
| Label | A5, 148 x 210 mm (about 5.8 x 8.3 in), standard; other sizes on request, including A4 and larger as a special configuration |
| Thermal transfer or direct thermal, 203 or 305 dpi, up to 400 mm/s (about 16 in/s); maximum print width 167.5 mm (about 6.6 in), maximum media width 180 mm (about 7.1 in) including liner | |
| Print engines | SATO S84-86 or Zebra ZE500, hot swappable for service |
| Faces labeled | Two adjacent faces (front and side, or side and rear) in one pallet stop; front, side and rear (three labels) in one or two stops; left or right line position without change parts |
| Application | Pneumatic contact tamp on a tri-axial linear movement with a rotating head; digital pressure sensing reverses the pad at a set label pressure |
| Tamp stroke | 500 mm or 1000 mm (about 20 or 39 in); the single axis ALcode L runs strokes up to 1500 mm (about 59 in) |
| Label roll | 300 mm (about 11.8 in) on a 76 mm (3 in) core; 400 mm option |
| Enclosure | Integrated base and safety cabinet with interlock switches; positive air pressure, heater, filtered ventilation and automatic door options for harsh areas |
| Interfaces | RS232C, Centronics, USB, LAN |
| Power and air | 220 V, 50 Hz, 800 W; 5 bar (about 73 psi), 50 l/min |
Figures are from Altech's ALcode P specification page and the ALcode P and ALcode family data sheets. Where a pallet needs labels on two faces, the two-face, single-stop build is the one to look at first, because every extra stop is more time for each pallet at the station.
The rest of this page covers what a pallet labeling system is made of and what the alternatives in the same range are.
What are the three ways Altech labels a pallet?
Altech labels a pallet three ways: a dedicated pallet labeling system such as the ALcode P at a fixed station, a large format tamp applicator driven by a print and apply head, or the ALrobot four axis articulated arm. The choice turns on how the pallet reaches the labeler, how many label positions it needs and the room around it.
1. A dedicated pallet labeling system: the ALcode P. A print and apply system built for the job, on a fixed line, where pallets arrive at a labeling station in a predictable position. This is the configuration to price first for a conveyed pallet line.
2. A large format tamp applicator on a print and apply head. Altech's price list includes large format tamp applicators at 500 mm (about 20 in), 750 mm (about 30 in) and 1000 mm (about 39 in); its brochure pairs the 500 mm unit with the industrial head of the Altech ALcode system and the 1000 mm unit with the ALcode P. Whether a given configuration reaches your label position is set by the applicator and the mounting geometry, which is a site measurement.
3. The ALrobot, a four axis articulated arm. Altech's AC25 ALrobot works within an 1100 mm (about 43 in) radius and is run from a 7 inch touchscreen, and Altech UK describes it as a fully robotic print and apply solution for part pallets, full pallets, double stacked pallets and multiple label positions. Details are on our page for the ALrobot AC25 arm.
Worth knowing: the ALrobot has no product page on altech.it, altech-us.com or altech-uk.com; Altech UK carries only a short launch announcement. If you have been told robotic pallet labeling is not available on this platform, it is.
Why does a pallet label have to be printed in place?
A pallet label is printed in place because it describes that one pallet: the serial shipping container code is unique to it, and under the Produce Traceability Initiative the hybrid pallet label also carries the GTIN, lot and case count for each unique mix of cases. A label carrying those contents cannot come off a preprinted roll.
- The SSCC, the serial shipping container code, is unique to that pallet. GS1's Logistic Label Guideline does list a preprinted label carrying only the SSCC as an option where a site has no print and apply, applied, then scanned to link it electronically to the pallet's contents; a label that also carries the contents is what GS1 calls a production label, printed and applied when the pallet is made.
- Under PTI, the hybrid pallet label carries the SSCC in a GS1-128 barcode, plus a GTIN, batch or lot and case count for each unique composition of cases on that pallet, per PTI's Best Practices for Formatting Hybrid Pallet Labels (2011). A mixed pallet carries more data than a single commodity pallet.
- Human readable text sits alongside the barcode for the people who have to read it on a dock at 4am.
- Print quality is graded against ISO/IEC 15416, and GS1 sets a minimum grade a GS1-128 symbol must reach to conform. A pallet labeling system that prints an unreadable code has not done its job, even though it produced a label.
The grade table, the GS1 minimum and their sources are in our guide to SSCC label requirements.
What is a pallet labeling system built from?
A print and apply pallet labeler is built from a thermal transfer print engine (with its integration assembly), an applicator sized for a pallet face, a data interface to your warehouse or ERP system, an optional scanner or camera check, and the handling that presents the pallet. Check a quote for each of them.
Print engine. Altech lists a SATO S84-86 or a Zebra ZE500 engine for the ALcode P, at 203 or 305 dpi. On Altech's price list the SATO S84 units are TX42, TX43 and TX46 (200, 300 and 600 dpi) and the S86 units TX62 and TX63 (200 and 300 dpi), and a SATO S series engine needs the ST50 integration assembly. That assembly is a separate line item, so check that a print and apply quote includes it.
Applicator. On the ALcode P this is a long stroke tamp (500 or 1000 mm) or the multi axis head that labels two adjacent faces. Altech's price list adds a 750 mm large format tamp, and Altech shows a rotary arm for front face pallet labeling and the ALrobot arm for multiple label positions.
Data interface. RS232C, Centronics, USB and LAN on Altech's ALcode P specification, with Bluetooth and wireless options on its data sheet. A pallet label is only correct if the machine is fed the right SSCC and the right case composition at the right moment, so the interface into your warehouse or ERP system is part of the specification rather than an afterthought.
Scanner or camera option. The ALcode P options include a laser scanner mounted off the application head to confirm label application and barcode readability, and Altech's price list carries a smart camera for over print verification (CS16). Either reads the code after it is printed, in line. On a pallet that is about to leave the building, that is the last chance to catch a code your customer's receiving scanner will reject.
Handling. Infeed and outfeed rotary tables, conveyors and stabilizing arrangements, depending on how the pallet arrives and where it goes.
For the wider category, including other ways to print a variable label at the point of application, see our overview of print and apply label applicators.
Where does pallet labeling fit in a produce operation?
For fruit and berry packers, pallet labeling is the second half of a PTI implementation. The case labels go on at the packing line and the pallet label goes on when the load is built. Both carry GS1-128 barcodes, both feed the same traceability record, and both get scanned by somebody who is not you.
The practical difference is that a case labeling failure tends to show on the line, while a pallet label problem may not surface until the receiving dock. Our hub on automatic pallet labelers compares the pallet options across the whole category.
Frequently asked questions
What throughput will an ALcode P run at? Altech rates it at up to 180 pallets an hour labeling one face and 120 an hour labeling two, depending on label size and applicator configuration. Tell us your pallets per hour and which faces need labeling and we will size it against those.
How many faces can it label? Two adjacent faces in a single pallet stop as standard, and three (front, side and rear) in one or two stops. For four faces, Altech shows two machines working together, and its single axis ALcode L reaches up to four faces with a conveyor turntable or turntable stretch wrapper.
How tall a load can it label? Reach is set by the applicator and the mounting geometry; give us the load height and we will tell you which configuration reaches it.
Do we need a pallet labeler if we already label cases? If your customer asks for an SSCC pallet label, you need a way to put one on every pallet; GS1 calls a preprinted SSCC-only label a good option where there is no print and apply capability, and a labeler is how you print the contents at the line. Case labels and pallet labels answer different questions in a traceability record: the case says what is in the box, the pallet says what is in the load.
Can we apply pallet labels by hand instead? You can, with a desktop printer and an operator. Where labels are not applied automatically, GS1's Logistic Label Guideline names printing them one pallet at a time as an option, to limit the risk of applying the wrong label.
Can you retrofit pallet labeling onto an existing palletizing area? That depends on the site. The constraints are where the pallet stops, how square the load is and whether there is room for the applicator to reach. Those get measured on site.
How much does a pallet labeling system cost? The price is set by the configuration (a dedicated system, a large format tamp on a print and apply head, or a robotic arm), the print engine, the data interface, any camera, and the handling around the pallet. We quote after measuring the pallet area, because a price without a specification behind it misleads both ways.
Get the pallet end of your traceability specified properly
The pallet label is applied by a separate machine from the case labeler, so it is worth specifying both ends at once.
We look at the packing line and the pallet build area together, and tell you what each end needs. Call 253-709-5566 or have your pallet area measured.
